| |
|
| |
 |
| HYDRAULIC SAWLOG CRUSHING MACHINE (H.T.P.M.250) |
* Machine frame is of steel construction
* Tempered and grinded saw shafts made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* Sawlog-driving hook system controlled by a hydraulic motor at the feeding stage
* Hydraulic-controlled rollers capable of spinning around the planks at the feeding stage
* Sawlogs are edged by means of 2 blades and saws attached to the surface of these blades. Intake of 4 boards from 6 multiple rip saws. Flanged adjustment between rip saw |
|
| |
 More >> |
 |
 |
| MECHANICAL SPLITTING MACHINE(M.Y.M.760) |
* Machine frame is of steel construction
* Tempered and grinded saw shafts made of special steel
* Capability to attach rip saws of various diameters with movable upper saw shaft
* Smooth replacement of rip saws thanks to the reducer located at the upper section of the machine
* Manual cleaning of resins sticking on the saw surface by diesel spray
* Manual lubrication |
|
| |
More >> |
|
 |
| HYDRAULIC HORIZONTAL EDGER(H.Y.M.400) |
* Machine frame is of steel construction
* Tempered and grinded saw shafts made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* Intake of 2 wooden boards and 1 slab from the workpiece by means of 4 cutting saws. Flanged adjustment between the saws
* Rotary action of towing roller, side press roller and upper press roller is manually controlled
* Ascend and descend of upper press roller is manually controlled
* Workpiece thickness is adjusted by means of the h |
|
| |
More >> |
|
 |
| MULTIPLE HYDRAULIC RIP SAWS WITH DOUBLE SHAFTS (H.Ç.D.2M.250) |
* Machine frame is of steel construction
* Tempered and grinded saw shafts made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, hydraulic side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* Flanged adjustment between saws
* Mechanical measurement of workpiece height
* Rotary action of towing rollers and press rollers is manually controlled. Furthermore, ascend a |
|
| |
More >> |
|
 |
| MULTIPLE HYDRAULIC RIP SAWS WITH SINGLE SHAFT(H.Ç.D.1M.160) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, hydraulic side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* Flanged adjustment between saws
* Mechanical measurement of workpiece height
* Rotary action of towing rollers and press rollers is manually controlled. Furthermore, ascend an |
|
| |
More >> |
|
 |
| MULTIPLE HYDRAULIC RIP SAWS WITH SINGLE SHAFT(H.Ç.D.1M.125) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, hydraulic side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* Flanged adjustment between saws
* Mechanical measurement of workpiece height
* Rotary action of towing rollers and press rollers is manually controlled. Furthermore, ascend an |
|
| |
More >> |
|
 |
| TRACK-TYPE MULTIPLE HYDRAULIC RIP SAWS WITH DOUBLE SHAFTS(H.Ç.D.2M.250.P) |
* Machine frame is of steel construction
* Tempered and grinded saw shafts made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, hydraulic side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* The master shaft of the upper saw is adjustable. Saws of min and max diameter of 300 mm and 400 mm respectively can be employed
* Flanged adjustment between saws
* Mechanical |
|
| |
More >> |
|
 |
| TRACK-TYPE MULTIPLE HYDRAULIC RIP SAWS WITH DOUBLE SHAFTS(H.Ç.D.2M.160.P) |
* Machine frame is of steel construction
* Tempered and grinded saw shafts made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of an inverter-equipped reducer motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, a side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* The master shaft of the upper saw is adjustable. Saws of min and max diameter of 250 mm and 300 mm respectively can be employed
* Flanged adjustment between saws
* M |
|
| |
More >> |
|
 |
| TRACK-TYPE MULTIPLE HYDRAULIC RIP SAWS WITH SINGLE SHAFT (H.Ç.D.1M.125.P) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, a side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* The master shaft of the upper saw is adjustable. Saws of min and max diameter of 300 mm and 400 mm respectively can be employed
* Flanged adjustment between saws
* Mechanical measurem |
|
| |
More >> |
|
 |
| MECHANICAL TRACK-TYPE MULTIPLE HYDRAULIC RIP SAWS WITH SINGLE SHAFT (M.Ç.D.1M.100.P) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of an inverter-equipped reducer motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, a side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* The master shaft of the upper saw is adjustable. Saws of min and max diameter of 250 mm and 350 mm respectively can be employed
* Flanged adjustment between saws
* Me |
|
| |
More >> |
|
 |
| HYDRAULIC MOVABLE SAWLOG EDGER(H.Y.2G.120) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of a hydraulic motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, a side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* Three slots for 1 stationary and 2 movable saws
* Movable saws are driven by an electrically-controlled piston
* Capability to edge the 2 sides of the workpiece and process 2 boards s |
|
| |
More >> |
|
 |
| MECHANICAL MULTIPLE RIP SAWS WITH EDGING CAPABILITY(M.S.Ç.D.Y.80) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Cutting speed can be reduced down do 0 d/d on stepless basis by means of an inverter-equipped reducer motor depending on the rigidity and resinous structure of the workpiece and other decisive factors
* During cutting the sawlog with clean three sides, a side square is employed, but in sawlog with only two clean sides, direction marker is used instead
* A measuring gauge is available on the front to adjust the width of the workpiece. Accordingly, the operator can feed workpieces to the machine as per the width range of 125-150 |
|
| |
More >> |
|
 |
| MECHANICAL MULTIPLE-EDGING MACHINE (M.S.Y.M.60) |
* Machine frame is of steel construction
* Tempered and grinded saw shaft made of special steel
* Flanged adjustment between the saws. Sizes on the machine are fixed, in case the operator desires to cut in a customized size, flanges between the saws can be set accordingly.
* Rotary action of the towing roller is controlled by a reducer motor.
* Mechanical measurement of workpiece height
* Ascend and descend of press rollers is manually controlled.
* Safety sheets and single-row safety plates to secure non-return of the processed workpiece
* Manual lubrication |
|
| |
More >> |
|
|
|
|
Untitled Document
|
|
